Phillips 66 Victory Aviation Oil 100AW

Phillips 66 Victory Aviation Engine Oil Grade 100AW Containing Lycoming Additive LW-16702

Phillips 66 Victory Aviation Oil 100AW, is an ashless dispersant, single-grade engine oil pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) as mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It is recommended for use in opposed piston and radial piston aircraft engines where cam lifter wear is a concern.

The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (nondispersant) mineral oils.

This product has a high viscosity index and low pour point compared with many other single-grade aircraft engine oils, allowing its use over a wide temperature range.

This oil is FAA approved as an alternate method of compliance to AD80-04-03 R2, paragraph b.1. It also has the following benefits:

• Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
• Pre-blended with Lycoming-approved antiwear additive
• High film strength for protection against wear and piston scuffing
• High viscosity index and low pour point for use over a wide temperature range
• Protects against rust and corrosion
• Formulated with the same high-quality base oils as used in Phillips 66 X/C Aviation Oil

Application

• Opposed piston aircraft engines, especially where cam lifter wear is a concern

Meets the requirements of: 

• Avco Lycoming Material Specification No. 310G
• Pratt & Whitney Service Bulletin No. 1183 Rev. U
• SAE Standard J1899
• Teledyne Continental Material Specification MHS-24B
• U.S. Military Specification MIL-L22851D (obselete) for additive treatment

QPL Approval Number: D07L2-50